Wiring Harness — Rear Door (Freelander 1)

Dismantling

1. Remove the protective film from the rear door.

DOORS, Removing the front door assembly to provide access to other components, installing the front door, Plastic trim for the rear door.

2. Disconnect the pads from the door lock and the window lift motor.

3. Remove the 7 clamps securing the harness to the door.



4. Release the upper trim of the B/C pillar and place it aside.



(The material was taken from a website: LRman.ru)



5. Release the pads at the base of the B/C pillar and disconnect the pads.

6. Separate the harness sheath from the B/C pillar and pull the harness through the B/C pillar.

7. Remove the harness housing from the front of the door, route the wiring harness inside the door.

8. Remove the door wiring harness.

Installation

1. Place the harness in the door and secure with clamps.

2. Connect the shoes to the door lock and the window lift motor.

3. Pass the harness through the hole in the front of the door and secure the sheath to the door.

4. Pull the harness inside the B/C pillar and secure the sheath to the B/C pillar.

5. Attach and secure the connector blocks to the base of the "B/C" pillar.

6. Install the upper trim of the "B/C" pillar and secure it with the clamps.

7. Install the rear door protective film.

DOORS, Removing the front door assembly to provide access to other components, installing the front door, Plastic trim for the rear door.