Cruise control controller (Freelander 1)

Dismantling

1. Move the right front seat fully forward.



2. Unscrew the 2 screws securing the controller cover.

3. Remove the cover.

4. Remove the controller interface from the bracket and set it aside.

5. Unscrew the 2 screws securing the controller.

6. Disconnect the connector from the controller and remove the controller.

Installation

1. Connect the connector to the controller.

The original was published on the portal (LRMAN.RU)

2. Install the controller and tighten the mounting screws.

3. Install the controller interface on the bracket.

4. Install the controller cover and secure it with screws.

5. Move the seat to the middle position.