Removing
1. Remove trim panels from both pillars "A". Refer to Procedure: Rack Trim Panel (501-05 Interior trim, Removal and installation).
2. Remove the upper trim panels of both pillars "IN". Refer to Procedure: Upper Pillar Trim Panel (501-05 Interior trim, Removal and installation).
3. Remove trim panels from both pillars «WITH». Refer to Procedure: 'C' Pillar Trim Panel (501-05 Interior trim, Removal and installation).
4. Remove the upper trim panels of both pillars "D". Refer to Procedure: 'D' Pillar Trim Panel (501-05 Interior trim, Removal and installation).
5. Remove a rear-view mirror of salon. Refer to Procedure: Interior Rear View Mirror (501-09 Rear-view mirrors, Removal and installation).
6. Remove both sun visors.
7. Remove the four passenger handrails.
8. Release the rear headlining.
9. Release the front door seals.
10. Disconnect the roof lining.
11. Close sunroof panel blind.
12.
- Carefully slide the sunroof sunshade tube to the right.
- Release the plastic pin from its holder.
Do not allow the sunroof sunshade tube to rotate. Do not release the metal pin from the holder until the locking rod has been inserted.
13.
- Using a suitable rod (diameter 1 mm), lock the sunroof blind.
- Release the metal pin from its holder.
14. Remove the sunroof.
Installation
1. Install sunroof slider base onto rails.
2.
- Fix the metal pin in its holder.
- Remove the locking rod from the sunroof blind.
- Carefully slide the sunroof sunshade tube to the right.
- Position the plastic pin in its holder and secure it.
CAUTION: Do not rotate the sunroof sunshade tube until the plastic pin is secured in its holder.
1. Open the blind of the sunroof panel.
2. Attach the headlining.
3. Attach the front door seals.
4. Attach the rear headlining.
5. Install passenger handrails.
6. Install sun visors.
7. Establish a rear-view mirror of salon. Refer to Procedure: Interior Rear View Mirror (501-09 Rear-view mirrors, Removal and installation).
8. Install trim panels "D". Refer to Procedure: 'D' Pillar Trim Panel (501-05 Interior trim, Removal and installation).
9. Install pillar trim panels "WITH". Refer to Procedure: 'C' Pillar Trim Panel (501-05 Interior trim, Removal and installation).
10. Install trim panels "IN". Refer to Procedure: Upper Pillar Trim Panel (501-05 Interior trim, Removal and installation).
11. Install pillar trim panels "A". Refer to Procedure: Rack Trim Panel (501-05 Interior trim, Removal and installation).
Comments on this article