Removing
1. Remove trim panels from both pillars "A". Refer to Procedure: Rack Trim Panel (501-05 Interior trim, Removal and installation).
2. Remove the upper trim panels of both pillars "IN". Refer to Procedure: Upper Pillar Trim Panel (501-05 Interior trim, Removal and installation).
3. Remove trim panels from both pillars «WITH». Refer to Procedure: 'C' Pillar Trim Panel (501-05 Interior trim, Removal and installation).
4. Remove the upper trim panels of both pillars "D". Refer to Procedure: 'D' Pillar Trim Panel (501-05 Interior trim, Removal and installation).
5. Remove a rear-view mirror of salon. Refer to Procedure: Interior Rear View Mirror (501-09 Rear-view mirrors, Removal and installation).
6. Remove both sun visors.
7. Remove the four passenger handrails.
8. Release the rear headlining.
9. Release the front door seals.
10. Disconnect the roof lining.
11. Close the roof glass panel shutter.
12. Gently slide the glass roof panel shade tube to the left. Remove the plastic pin from its place.
Do not allow the glass roof panel shade tube to rotate. Do not remove the metal pin from its place until the locking pin is in place.
13.
- Using a suitable pin (diameter 1 mm), lock the sunroof glass panel blind.
- Remove the metal pin from its place.
14. Remove the roof glass panel curtain.
Installation
1. Install the sliding legs of the glass roof panel shade into the guides.
2.
- Lock the metal pin in place.
- Remove the retaining pin from the sunroof glass panel shutter.
- Gently slide the glass roof panel shade tube to the left.
- Align and lock the plastic pin in place.
CAUTION: Do not allow the glass roof panel shade tube to rotate while the plastic pin is locked in place.
3. Open the glass roof panel shutter.
4. Attach the headlining.
5. Attach the front door seals.
6. Attach the rear headlining.
7. Install passenger handrails.
8. Install sun visors.
9. Establish a rear-view mirror of salon. Refer to Procedure: Interior Rear View Mirror (501-09 Rear-view mirrors, Removal and installation).
10. Install trim panels "D". Refer to Procedure: 'D' Pillar Trim Panel (501-05 Interior trim, Removal and installation).
11. Install pillar trim panels "WITH". Refer to Procedure: 'C' Pillar Trim Panel (501-05 Interior trim, Removal and installation).
12. Install pillar trim panels "IN". Refer to Procedure: Upper Pillar Trim Panel (501-05 Interior trim, Removal and installation).
13. Install trim panels "A". Refer to Procedure: Rack Trim Panel (501-05 Interior trim, Removal and installation).
Comments on this article