Pos. | spare part no | Name |
1 | - | Descent control switch (HDC) |
2 | - | Special programs off (Special programs disabled). |
3 | - | Grass/Gravel/Snow program ("Grass/gravel/snow") |
4 | - | Rotary regulator |
5 | - | Mud/Ruts Program ("mud/ruts") |
6 | - | Sand program ("Sand") |
7 | - | Dynamic Stability Switch (DSC) |
Each program corresponds to a symbol that schematically depicts a certain road surface. The rotary knob will only select the last program in the direction of rotation. Further rotation of the switch in any direction after the last program has been selected will have no effect. For example, after a program has been selected «Sand», further clockwise rotation of the knob will have no effect.
The control box and rotary control are connected via a harness that also includes the wiring for the HDC and DSC switches and the lighting circuits. The control unit and rotary regulator use four wires from the harness to supply 12 V from the battery (ignition - only if the ignition is on), for supply «masses», and «pluses» And «minus» high-speed CAN bus.
Comments on this article