Contents: Sealants and lubricants ⇩ General technical characteristics ⇩ Tightening torque specifications ⇩
Sealants and lubricants
| Name | Technical specifications |
| * Recommended oil | Shell TF 0753 |
| Filling volume - wet and dry filling | 1.5 l |
| Primary shaft spline grease | Weicon TL7391 |
| Sealant | STC 50550 or Loctite 5900 |
* CAUTION: Use only the specified lubricant.
General technical characteristics
| Name | Technical specifications |
| Model | Magna Steyr |
| Model | DD295 |
| Type | Two-speed transfer case with permanent all-wheel drive, synchronized shift function while driving, 50/50 torque separation on the center differential and an oil-bath clutch with active control |
| Coupling type | Multi-plate fluid coupling |
| Maximum torque | 2500 Nm |
| Gear ratios: | |
| Maximum shift speeds, manual transmission: | |
| Maximum shift speeds, automatic transmission: | |
Tightening torque specifications
| Description | Nm | lb-ft |
| Transfer case drain plug | 22 | 16 |
| Transfer Case Fluid Filler/Level Plug | 22 | 16 |
| Fuel tank heat shield mounting nuts/bolts | 10 | 7 |
| Torx Drive Shaft Screws | 55 | 40 |
| Drive shaft center bearing bolts | 30 | 22 |
| Gearbox support cushion | 60 | 44 |
| Wiring harness mounting bolts | 10 | 7 |
| Fuel Line Support Bracket Bolts | 10 | 7 |
| Transfer case mounting bolts | 45 | 33 |
Comments on this article