Dismantling
1. Remove the hardtop or awning.
ROOF, REPAIRS, Hardtop - removal for access to the repair site and installation in place.
ROOF, REPAIRS, Hardtop - removal for access to the repair site and installation in place.
2. Remove the 2 screws securing the C-pillar trim panel 'E', release the panel from the 2 clips and remove it.
3. Loosen the 3 Torx screws securing the latch and remove it.
4. Remove the lower decorative overlay of a back part of the side panel.
INTERIOR TRIM PARTS, REPAIRS, 3-door luggage compartment lower decorative panel.
5. Remove the 3 Torx screws securing the hardtop retainer and remove the retainer.
Installation
1. Install the latch, screw in and tighten the Torx screws with a torque of 10 Nm.
2. Place the trim panel on the 'E' post and secure it with the clips and screws.
3. Fit the hardtop retainer, install the Torx screws and tighten to 10 Nm.
4. Install the bottom trim on the back of the side panel.
INTERIOR TRIM PARTS, REPAIRS, 3-door luggage compartment lower decorative panel.
5. Install a hardtop or awning.
ROOF, REPAIRS, Hardtop - removal for access to the repair site and installation in place.
ROOF, REPAIR WORKS, Frame and tarpaulin assembly - removal for access to the repair site and installation in place.
Comments on this article