Dismantling
1. Remove both side windows, lift up the fasteners "Velcro", unbutton "lightning" and click on the pins.
2. Remove the luggage compartment cover.
3. Loosen the braces on the side posts.
4. Remove the fabric from the 'E' post.
5. Release the frame from the rear clips.
6. Move the tarpaulin forward and attach the clips to the rods.
7. Wrap the cover and fix it.
8. Release and remove the hinge axles, disconnect the extensions.
9. Loosen the top clamp bolts and release the top rail latches.
10. Remove the tarpaulin assembly.
Installation
1. Install the tarpaulin assembly and fasten the top rail latches.
2. Tighten the clamp bolts.
3. Align the braces and install the hinge pins.
4. Release the cover from the harness.
5. Release the clamps in the rods and move the tarpaulin towards the rear of the vehicle.
6. Fix the lock of a frame of a door of a back compartment in constipations.
7. Replace the 'E' pillar cover.
8. Stretch the side posts.
9. Install the cover.
10. Install the side windows, zip up "lightning", press the pins and close the fasteners "Velcro".
Comments on this article