Dismantling
1. Remove pan and discard gasket.
AUTOMATIC TRANSMISSION - ZF 5HP24, REPAIR WORKS, Gasket - automatic transmission oil pan.
2. Remove the 2 Torx screws and remove the filter from the spool and valve block. Remove and discard O-ring
Assembly
1. Wipe the surfaces mating with the filter.
2. Install a new o-ring on the filter and install the filter on the spool and valve block.
3. Screw in the Torx screws securing the filter and tighten them with a torque of 6 Nm.
4. Replace the drip tray.
AUTOMATIC TRANSMISSION - ZF 5HP24, REPAIR WORKS, Gasket - automatic transmission oil pan.
Comments on this article