Torque converter seal (Range Rover 3)

Dismantling

1. Remove the automatic transmission assembly.

AUTOMATIC TRANSMISSION - ZF 5HP24, REPAIR WORK, Automatic transmission complete with transfer case - removal and installation.

2. Remove the torque converter retaining plate.



3. Install the LRT-44-010 pullers onto the torque converter and separate the torque converter from the automatic transmission.



4. Remove the retaining ring securing the torque converter seal.

5. Carefully remove the sealing ring.

Assembly

1. Wipe the groove in the gearbox housing under the torque converter shaft seal. Lubricate the torque converter shaft seal with fresh working fluid.



2. Using the LRT-44-031 tool, install a new seal.



3. Install the retaining ring in place.

4. Install the torque converter on the automatic transmission, make sure that the torque converter is fully aligned with the working fluid pump drive.

5. Remove the LRT-44-010 pullers from the torque converter.

6. Install the torque converter retaining plate and secure it with screws.

7. Install the automatic transmission assembly into place.

AUTOMATIC TRANSMISSION - ZF 5HP24, REPAIR WORK, Automatic transmission complete with transfer case - removal and installation.