Rear outer seat belts (Discovery 1)

1. Remove the rear folding seat (if installed).

2. Loosen the speaker mounting screws, disconnect the wires, and remove the speaker. Remove the rear trim panel.

3. Remove the lower luggage compartment trim panels.

4. Unscrew the bolts securing the belt supports to the wheel arch and window frame.

5. Unscrew the bolt securing the belt inertia mechanism and remove the belt.

6. Remove the belt clamp from the floor bracket.



7. Installation is carried out in reverse order. Tightening torque of mounting bolts: 32 Nm.