Rear floor cross member assembly (Freelander 1)

Dismantling

1. Disconnect the negative battery terminal.

2. Disconnect the generator.

3. Disconnect all electronic units.

4. Remove the trunk door.

DOORS, Removing the front door assembly to provide access to other components, installing the front door, Removing the tailgate assembly to provide access to other components, installing the tailgate.

5. Remove the luggage compartment door opening seal.

6. Remove the left and right rear lower trims.

INTERIOR TRIM PARTS, REPAIR WORK, Lower decorative panel of the luggage compartment of a 5-door car.

7. Remove the luggage compartment mat.

INTERIOR TRIM DETAILS, REPAIR WORK, Luggage compartment floor covering.

8. Release the wiring harness from the bottom of the luggage compartment door opening and move it to the side.

Repair works

1. Remove damaged panels, prepare joint edges and install new panels in accordance with the Body Panel Repair Rules. Punch or drill holes in the panel to be installed for the plug weld, as shown in the figure.

Installation

1. Secure the wires running along the bottom of the luggage compartment door opening.



The original article is located on: LRMAN.RU

2. Place and secure the luggage compartment mat.

INTERIOR TRIM DETAILS, REPAIR WORK, Luggage compartment floor covering.

3. Install the left and right rear lower trims.

INTERIOR TRIM PARTS, REPAIR WORK, Lower decorative panel of the luggage compartment of a 5-door car.

4. Install the luggage compartment door opening seal.

5. Install the tailgate.

DOORS, Removing the front door assembly to provide access to other components, installing the front door, Removing the tailgate assembly to provide access to other components, installing the tailgate.

6. Connect all electronic units.

7. Connect the generator.

8. Connect the negative battery terminal.