Upper pillar trim panel (Freelander 2)

NOTE: The removal procedure description may contain installation steps.

Removal

1. Remove the lower B-pillar trim panel. Refer to procedure: Lower B-Pillar Trim Panel (501-05 Interior Trim, Removal and Installation).

2. Tightening torque: 40 Nm

WARNING: Use a new bolt.

3. Tightening torque: 25 Nm



4. NOTE: Do not perform further disassembly if the component is removed only for access.



The original article is located on the website [www.lrman.ru]

Installation

1. When installing, perform the removal procedure in reverse order.