Pos. | spare part no | Name |
1 | - | electric motor |
2 | - | Shaft |
3 | - | electrical connector |
The single speed rear window wiper motor is mounted on the inside of the liftgate and secured with 3 bolts. The bushings isolate the motor assembly from the bodywork, which helps reduce transmission of motor noise to the liftgate.
The output shaft of the electric motor is connected to a worm gear, which transfers the rotational movement of the output shaft to the movement along the arc of the rear wiper arm.
A 3-pin electrical connector is used to connect the rear wiper motor to the vehicle wiring harness. The electrical connector provides motor power from AJB, wiper park position contact from CJB, and ground connection.
AJB includes a rear wiper relay. The relay is controlled by the CJB, which connects power and ground according to its software logic.
Comments on this article