| Detail | Specifications |
| Front of the car | Conventional coil spring with twin-tube shock absorber and reinforced anti-roll bar |
Spring Identification
| Spare part number | Specifications | Insulator |
| LR 001131 | Green/Yellow/Orange | LR 001145 |
Tightening torque specification
| Description | Nm | lb-ft |
| Shock absorber lock nut* | 80 | 59 |
| Front subframe crossmember: | ||
| M10* | 45 | 33 |
| M16* | 140 + 240° | 103 + 240° |
| Rear subframe to body mounting bolts* | 140 + 240° | 103 + 240° |
| Front height sensor | 10 | 7 |
| Bolt for fastening the axle shaft to the hub* | 45 + 80° | 33 + 80° |
| Front Lower Control Arm Bolt | 140 + 45° | 104 + 45° |
| Lower Control Arm Rear Nut and Bolt | 175 | 129 |
| Lower Control Arm Conical Ball Joint Locknut* | 100 | 74 |
| Upper nuts for fastening the spring and shock absorber assembly | 30 | 22 |
| Anti-roll bar clamp bolts | 175 | 129 |
| Anti-roll bar connecting arm nuts* | 60 | 44 |
| Bolt securing steering knuckle to shock absorber | 110 | 81 |
* New nuts/bolts must be installed
Comments on this article