Front panel blinds (Discovery 1)

1. Disconnect the battery.

2. Remove the radio.

3. Release the tabs securing the radio bracket to the blind panel and remove the bracket.



4. Remove the watch, see. "Electrical equipment of a car".

5. Release the tabs of the coin drawer (4 pcs.).

6. Remove the coin drawer.



(The article is based on data from the website LRMAN.ru)

7. Remove the heater control panel handles and fan speed button.



8. Unscrew the 2 screws securing the heater control panel and remove the panel.



9. Unscrew the 4 screws securing the heater control unit.

10. Through the hole for the small item box, unscrew the screw securing the blind panel.



11. Through the hole for the coin box, unscrew the screw in the hole for the clock.

12. Unscrew the 2 upper screws securing the blind panel.

Note: In some cases, LEDs are installed on the blind panel. In this case, remove the LEDs from the panel.

13. Remove the decorative cover of the blind panel.

14. Unscrew the 2 middle screws securing the blind panel.

15. Remove the blinds from the front panel.

16. Installation is carried out in reverse order.

Note: Be careful not to pinch the wires.