Filling volume
| Fuel tank | 86.3 l (18.9 gallons) (22.7 US gallons) |
General specification
| Name | Specification |
| System type | Mechanical - irreversible |
| Fuel pump module | Located in the fuel tank |
| Fuel pump: | |
| Type/location | Electric - submersible - located in the fuel tank |
| Working pressure | 450 kPa (4.5 bar) (65.25 psi) |
| Maximum performance at 12.3V | 122 l/h (26.8 gallons/hour) (32.2 US gallons/hour) |
| Fuel pressure regulator: | |
| Type/location | Built-in, inside the fuel tank |
| Working pressure | 450 kPa (4.5 bar) (65.25 psi) |
| Fuel filter | Located in the fuel pump module, has a replaceable filter element |
| Fuel sensors | Two sensors - front and rear. The front sensor is a remote type, installed in the fuel tank.; the rear sensor is located on the fuel pump housing |
Tightening torque specifications
The material was taken from a website www.LRman.ru
| Name | Nm | lb-ft |
| Fuel tank bracket bolts | 10 | 7 |
| Fuel tank bolts | 45 | 33 |
| Fuel Tank Heat Shield Bolts | 5 | 4 |
| Fuel Tank Heat Shield Nuts | 3 | 2 |
| Fuel Pump Module Clamp Screw | 4 | 3 |
| Fuel filler pipe | 10 | 7 |
| Wheel nuts | 140 | 103 |
Comments on this article