Rear mudguard — removal and installation (Freelander 1)

Dismantling

1. Raise the rear of the vehicle.

CAUTION: Do not work on or under a vehicle supported solely by a jack. Always support the vehicle with safety stands.

2. Remove the wheel(s).

3. Remove the rear mudguard.

EXTERIOR PARTS, REPAIR WORK, Rear mudguard.

4. Loosen the screw securing the mudguard bracket to the bumper and remove the bracket.



5. Unscrew the 2 screws securing the mudguard liner to the wing.

6. Unscrew the 3 screws securing the mudguard to the wing and bumper.

7. Unscrew the 5 screws securing the mudguard to the wheel arch.

8. Loosen and remove the fender liner.

Installation

1. Place the fender liner against the wheel arch.

2. Tighten the 8 screws securing the mudguard liner to the wheel arch.



3. Screw in and tighten the screws securing the mudguard to the wing and bumper.

4. Screw in 2 screws to secure the mudguard liner to the wing.

5. Install the fender liner bracket onto the bumper and secure it with a screw.

6. Install the rear mudguard.

EXTERIOR PARTS, REPAIR WORK, Rear mudguard.

7. Reinstall the wheel(s) and tighten the nuts to 115 Nm.

8. Remove the supports and lower the vehicle.