Since 2010 MY
The gear shift indicator on the instrument panel turns on to notify the driver to shift to a higher gear to reduce fuel consumption. Following the indicator's recommendations can reduce fuel consumption by 5%.
Gear shift indicator:
The gear shift indicator is standard on vehicles with a manual transmission. It is automatically activated each time the ignition is turned on. However, the driver can deactivate the indicator by pressing the "Eco" button on the control panel.
NOTE: The Eco button also turns the Start/Stop system on and off.
For further information, please refer to the chapter: Starting system (303-06C Starting system - 2.2L Duratorq - Td4, Vehicles manufactured from 03/2009, Description and operation).
Eco Switch:
The gear shift indicator comes on to notify the driver that a higher gear is required. Depending on the driver's response and driving conditions, the indicator operates as follows:
- Goes out when upshifting.
- Goes out before upshifting if driver demands or road conditions change.
- Goes out after 12 seconds if the indicator is ignored. Either of two events will reset the indicator:
- the driver changes gear
- the driver increases speed after exiting a sharp turn
The gear shift indicator is only for driver assistance; the choice of gear remains with the driver, who makes a decision taking into account the driving conditions.
Gear shift indicator:
- Does not recommend downshifting
- Unable to predict the slope and curvature of the road ahead
(The article was copied from a resource: «www.LRman.ru»)
Comments on this article