Jet thrust (Discovery 1)

1. Loosen the wheel nuts.

2. Raise the front of the car, place it on stands under the frame, and remove the wheels.

3. Place a jack under the front axle and lift the axle.

4. Unscrew the nuts securing the rod to the frame crossmember.



5. Disconnect the ball joint of the steering tie rod.



6. Disconnect the torque rod fasteners from the bridge.

[The material was taken from a website www.LRman.ru]

7. Remove the thrust rod.



8. Replace the tie rod bushings.

Caution: Apply pressing force to the outer metal band of the bushing.

9. Install the rod into place. Tightening torque: axle mount - 197 Nm, frame mount - 176 Nm.