Jet thrust bushings (Discovery 1)

1. Raise the car on a lift.

2. If there is no lift, place the vehicle on stands placed under the rear axle.

3. Unscrew the rear tie rod fasteners.



4. Unscrew the front tie rod fasteners.

5. Remove the traction assembly.

6. Loosen the lock nut.

7. Remove the mounting bracket from the rod.



8. Press out the bushing.

9. Install the new bushing.

Caution: Apply pressing force to the outer metal band of the bushing.

10. Install the parts removed in steps 6 and 7. Do not tighten the lock nut.

11. Install the parts removed in steps 3-5.

12. Lower the car onto its wheels. Tighten the lock nut to 176 N·m.