Removing
NOTE: The front seat height adjustment motor is supplied as part of the front seat frame assembly.
1. Remove the front seat belt buckle. For more information refer to Front seat belt buckle (76.73.30)
2. Remove the front seat cushion assembly. For more information, refer to Front Seat Cushion (78.10.12/99)
3. Remove the front seat back assembly.
- Release and disconnect 2 electrical connectors.
- Remove 4 Torx head screws.
4. Remove the front seat electrical connector bracket. Remove 4 screws.
5. Remove the front seat tilt motor.
- Release the 3 cable harness clamps.
- Remove 4 Torx head screws.
6. Remove the front seat position sensor. Loosen 2 nuts.
7. Remove the electric motor of adjustment of height of a forward seat.
- Disconnect the electrical connector.
- Loosen 8 nuts.
Installation
1. Install the front seat height adjustment motor.
- Tighten nuts (tightening torque 25 Nm).
- Connect the electrical connector.
3. Install the front seat tilt motor.
- Tighten Torx Head Bolts (with a torque of 10 Nm).
- Connect the wiring harness.
5. Install the front seat back assembly.
- Tighten Torx Head Bolts (tightening torque 25 Nm).
- Connect and fix electrical connectors.
7. Install the front seat belt buckle. For more information refer to Front seat belt buckle (76.73.30)
Comments on this article