Contents: Hydraulic fluid ⇩ General technical characteristics ⇩ Tightening torque specifications ⇩ Clutch Control Torque Specifications ⇩
Hydraulic fluid
| Name | Specification |
| * Recommended hydraulic fluid | SHELL DONAX YB DOT4 ESL LIQUID |
CAUTION: * If the specified brake fluid is not available, use low viscosity DOT 4 brake fluid meeting ISO 4925 Class 6 and Land Rover LRES22BF03.
General technical characteristics
| Name | Technical specifications |
| Type | Diaphragm spring, hydraulically controlled self-adjusting clutch with lead-free friction linings that engage with a dual flywheel |
| Drive disk diameter | 258 mm (10,15 in) |
| Pressure plate diameter | 258 mm (10,15 in) |
| Clutch disc friction material | Raybestos 5088 |
| Clutch disc thickness (measured from the outer surface of the disc to the rivet): | |
| Leading disk (new) | 3,2 mm (0,125 in) |
| Maximum operational value | 0,2 mm (0,007 in) |
| Pressure plate (new) | 3,2 mm (0,125 in) |
| Maximum operational value | 0,2 mm (0,007 in) |
| Master cylinder | Integrated with the master brake cylinder |
| Slave cylinder | With quick-release coupling for hydraulic line and air release valve |
Tightening torque specifications
| Description | Nm | lb-ft |
| * Bolts securing the clutch housing to the flywheel | 25 | 18 |
* Tighten the bolts gradually in a crisscross pattern.
Clutch Control Torque Specifications
| Description | Nm | lb-ft |
| Clutch pedal nut | 45 | 33 |
| Clutch slave cylinder bolts | 10 | 7 |
| Clutch bleeder nipple | 10 | 7 |
| Clamp bolt for the working cylinder pipe | 10 | 7 |
| Master cylinder bolts | 10 | 7 |
| Clutch pedal nuts assembly | 25 | 18 |
| Brake Pedal Bracket Torx Bolt | 10 | 7 |
| Clutch Master Cylinder Nuts | 10 | 7 |
| Gearbox heat shield | 10 | 7 |
Comments on this article