Cushion and backrest of the rear solid seat of a 3-door car (Freelander 1)

Dismantling

1. Remove the 2 Torx bolts securing the seat to the floor crossbar.



2. Tilt the seat forward and remove the 2 Torx bolts securing the hinges.

3. With the help of a partner, remove the seat.

[The article was copied from a resource www.lrman.ru]

Installation

1. With the help of a partner, install the seat in the car and align the position of the hinges.

2. Tighten the Torx bolts, lower the seat and tighten the bolts to 25 Nm.

3. Install the front Torx bolts into the floor cross member and tighten to 25 Nm.