Rear seat cushion trim for a 3-door car (Freelander 1)

Dismantling

1. Remove the rear seat assembly.

SEATS, REPAIR WORK, Cushion and backrest of the rear solid seat of a 3-door car.

2. Loosen the 2 console trim mounting screws and remove the trim.



3. Remove the 4 screws securing the rear seat center console and remove the console.

4. Unscrew the 4 screws securing the side trims and remove the trims.

5. Remove the 4 Torx bolts and remove the seat back from the cushion.



6. Release the backrest cover from the backrest frame and remove the cover.



(The full version is available on the website: www.lrman.ru)



7. Release the back of the cushion cover from its attachment to the frame.

8. Release the front and side parts of the cushion upholstery from the frame.



9. Remove the cushion and upholstery from the frame.



10. Remove and discard the 13 trim retaining rings and remove the trim from the soft lining.

Installation

1. Place the upholstery on the soft pad and secure it with rings.

2. Secure the upholstery to the soft pad.

3. Install and secure the cushion with upholstery on the frame.

4. Align the seat cushion and backrest and tighten the Torx bolts to 28 N·m.

5. Install the seat back cover and secure it to the frame.

6. Install the seat belt anchor covers and tighten the screws securing them.

7. Install the rear console and secure it with screws.

8. Install the console cover and secure it with screws.

9. Replace the rear seat.

SEATS, REPAIR WORK, Cushion and backrest of the rear solid seat of a 3-door car.