Dismantling
1. Fold the rear right seat forward.
2. Turn away 2 screws and remove a cover of an inertia coil of a seat belt.
3. Turn away a nut and remove an inertial coil.
4. Turn away 5 screws and remove both covers of fastenings of a seat belt.
5. Turn away 3 bolts of fastening of a back of a seat to a pillow and remove a back from a pillow.
6. Remove both head restraints.
7. Remove the armrest niche trim.
8. Turn away 2 screws of fastening of an armrest and remove an armrest.
9. Release the seatback upholstery from the armrest niche.
10. Release the seat back upholstery from the seat belt hole and also release it from the attachment to the rear of the frame.
11. Release the upholstery from attachment to the bottom and sides of the frame. Remove the lock pad, and then remove the rear frame upholstery.
12. Release from fastening and remove 4 directing bars of head restraints.
13. Remove the seat back lock button cover.
14. Remove the backrest upholstery and soft padding from the seatback frame.
15. Remove and discard the 12 upholstery retaining rings and remove the upholstery from the padding.
Installation
1. Place upholstery on padding and secure with rings.
2. Fit the backrest upholstery and cushion to the seatback frame.
3. Install the head restraint rod guides and seat back lock button trim.
4. Fasten the bottom and sides of the upholstery to the frame.
5. Attach the padding to the rear of the frame and to the seat belt hole.
6. Attach the lock pad to the rear upholstery and install them on the frame. Make sure that the lock pad is properly secured in the lock body.
7. Attach the upholstery to the headrest recess.
8. Install the head restraint and tighten the fixing screws.
9. Establish an overlay of a niche of an armrest.
10. Install the head restraints.
11. Install the seatback and tighten the Torx bolts.
12. Install the side plates and tighten the screws for their fastening.
13. Install the inertial coil on the seat back and tighten the nuts of its fastening with a torque of 32 Nm.
14. Install the cover of the inertial coil and tighten the screws of its fastening.
15. Fix a back of a back seat by means of locks.
Comments on this article