Dismantling
1. Remove the rear seat assembly.
SEATS, REPAIR WORKS, Cushion and backrest of the rear solid seat of a 3-door car.
2. Turn away 2 screws of fastening of an overlay of the console and remove an overlay.
3. Turn away 4 screws of fastening of the central console of a back seat and remove the console.
4. Turn away 4 screws of fastening of lateral overlays and remove overlays.
5. Remove the 4 Torx bolts and remove the seat back from the cushion.
6. Release the backrest pad from the backrest frame and remove the pad.
7. Remove the head restraint.
8. Release the lower part of the upholstery from fastening to the frame.
9. Release the side parts of the upholstery from fastening to the frame.
10. Lift upholstery and soft padding to gain access to the guide rails of the head restraint.
11. Remove the guides.
12. Release the top part of an upholstery from fastening to a frame.
13. Remove an upholstery together with a soft laying.
14. Detach the upholstery from the padding, remove and discard the 15 rings.
15. Remove the upholstery from the soft pad.
Installation
1. Put the upholstery on the padding and secure it with rings.
2. Attach the upholstery to the padding.
3. Fasten the upper part of the upholstery to the frame.
4. Install the guides.
5. Fasten the bottom and sides of the upholstery to the frame.
6. Install the head restraint.
7. Align the seat cushion and backrest and tighten the Torx bolts to 28 Nm.
8. Install the seat back pad and secure it to the frame.
9. Install the seat belt anchorage covers and tighten their fastening screws.
10. Install the rear console and secure with screws.
11. Install console trim and secure with screws.
12. Reinstall the rear seat.
SEATS, REPAIR WORKS, Cushion and backrest of the rear solid seat of a 3-door car.
Comments on this article