Dismantling
1. Remove the front seat.
SEATS, REPAIRS, Front seat.
2. Remove the seatback recline handle.
3. Release the latches on the side pads and remove the pads.
4. Disconnect the 2 electrical connectors that are located under the seat cushion.
5. Release the 2 clamps securing the electrical connector to the seat frame.
6. Remove the 4 Torx bolts securing the backrest frame and remove the backrest from the cushion frame.
7. Release the clamps securing the cushion upholstery corners to the seat frame.
8. Release the clip securing the front edge of the cushion upholstery to the seat frame.
9. Release the clip securing the front edge of the cushion upholstery to the seat frame.
10. Release the back of the cushion from its attachment to the seat frame.
11. Remove the pillow along with the upholstery.
12. Loosen the 12 upholstery-to-cushion fixing rings.
13. Remove the upholstery from the pillow.
Installation
1. Put upholstery on the pillow. Fasten the upholstery with rings according to the marks made during dismantling.
2. Install and secure the upholstered cushion to the frame.
3. Align the backrest frame with the seat frame, install the Torx bolts and tighten to 45 Nm.
4. Attach connector blocks.
5. Attach the electrical connector to the frame and secure it with a clamp.
6. Install the seatback recline handle.
7. Install the side pads and secure them to the clips.
8. Install the front seat.
SEATS, REPAIRS, Front seat.
Comments on this article