Contents: Dismantling ⇩ Installation ⇩
Dismantling
1. Remove the rear right seat.
SEATS, REPAIR WORK, Rear right seat.
2. Loosen 2 screws and remove the seat belt inertia reel cover.
3. Unscrew the nut and remove the inertia reel.
4. Remove 5 screws and both seat belt anchor covers.
5. Remove the 3 Torx bolts and remove the seat back from the cushion.
6. Release the rear part of the seat cushion upholstery from its fastening to the frame.
7. Release the front and side parts of the cushion upholstery from the frame.
8. Remove the cushion and upholstery from the frame.
9. Unscrew the 2 Torx bolts securing the seat belt and its buckle. Remove the seat belt and its buckle from the frame.
10. Remove the cushion together with the upholstery.
11. Remove and discard the 17 trim retaining rings and remove the trim from the soft lining.
Installation
1. Place the upholstery on the cushion. Secure the upholstery with rings at the marks made during dismantling.
2. Install the seat belt buckle onto the seat base and tighten the bolt to 32 Nm.
3. Install the backrest upholstery and cushion onto the seatback frame.
(The article was copied from a resource: www.LRman.ru)
4. Fix the front and side parts of the cushion to the frame.
5. Secure the rear part of the seat cushion to the frame.
6. Align the seat cushion and backrest and tighten the Torx bolts to 28 Nm.
7. Install the seat belt anchor covers and tighten the screws securing them.
8. Install the inertia reel on the seat back and tighten its mounting nuts to a torque of 32 Nm.
9. Install the inertia reel cover and tighten the screws that secure it.
10. Replace the rear seat.
SEATS, REPAIR WORK, Rear right seat.
Comments on this article