Rear seat back upholstery with 40/20/40 split (Discovery 3)

Removal

1. Remove the inner seat back hinge cover.

• Release the side clip of the backrest upholstery.
• Remove the screw.
• Release the 2 clamps.

2. Remove the outer cover of the seat back hinge. Remove the screw.



3. Remove the side trim of the rear seat cushion. Remove 2 screws.



4. Remove the luggage compartment mounting strap. Remove the Allen bolt.





5. Remove the rear seat headrest. Press the 2 mounting clips.



6. Remove the rear seat head restraint retaining clips.



7. Remove the rear seat release handle.



8. Remove the rear seat release handle cover. Remove the screw.





9. Disconnect the electrical connector of the seatback heating mat. Install the side clip of the rear seat cushion.



10. Remove the rear seat back assembly. Remove the 3 Torx head bolts.



11. Install the rear seat back trim. Loosen the 5 clamps.



12. Remove the rear seat back upholstery. Remove 16 bent rings.

Installation

1. Install the rear seat back cover.

• Install 16 bent rings.
• Install 4 clamps.

2. Install the rear seatback assembly. Tighten the Torx head bolts. (tightening torque 45 Nm).

3. Connect the electrical connector of the seatback heating mat. Install the side clamp of the rear seat cushion.

4. Install the rear seat release handle cover. Tighten the screw.

5. Install the rear seat release handle.

6. Install the rear seat head restraint retaining clips.

7. Install the rear seat headrest.

8. Install the luggage compartment fastening strap.

9. Install the rear seat cushion side trim. Tighten the screws.

10. Install the front seatback hinge outer cover.

• Tighten the screws.
• Tighten the screw.

11. Install the front seat back inner cover.

• Install the clamp.
• Tighten the screw.
• Engage the side clip of the backrest upholstery.