Contents: Dismantling ⇩ Installation ⇩
Dismantling
1. Fold the rear left seat forward.
2. Remove 5 screws and both seat belt anchor covers.
3. Unscrew the 3 bolts securing the seat back to the cushion and remove the back from the cushion.
4. Remove the headrest.
5. Release the upholstery from its fastenings to the bottom and sides of the frame.
6. Remove the lock cover, and then remove the rear frame trim.
7. Release the rear part of the trim from its fastening to the frame.
8. Remove the guides of both headrest rods.
9. Remove the backrest upholstery and soft padding from the seat back frame.
10. Remove and discard the 9 trim retaining rings and remove the trim from the soft lining.
Installation
1. Place the lock cover on the rear trim and install them on the frame. Make sure the lock cover is properly secured to the lock body.
2. Place the upholstery on the soft pad and secure it with rings.
3. Install the backrest upholstery and cushion onto the seatback frame.
4. Install the headrest guide rods.
5. Secure the bottom and side trim pieces to the frame.
6. Secure the back of the trim to the frame.
7. Install the headrest.
8. Align the seat cushion and backrest and tighten the Torx bolts to 28 Nm.
9. Install the side panels and tighten the screws that secure them.
10. Secure the rear seat back with the locks.
Comments on this article