| Threaded connection | In the SI system | In Pound Feet |
| Alternator Drive Belt Tensioner Screw | 25 Nm | 18 ft·lbs |
| Generator bracket mounting screws (K1.8 engine) | 25 Nm | 18 ft·lbs |
| Generator eye screws and tensioner bars (engine K1.8) | 25 Nm | 18 ft·lbs |
| Bolt and nut for fastening the generator to the front mounting plate (KV6 engine) | 45 Nm | 33 ft·lbs |
| Generator bracket mounting screws (K1.8 engine) | 25 Nm | 18 ft·lbs |
| Generator eye screws and tensioner bars (engine K1.8) | 25 Nm | 18 ft·lbs |
| Generator mounting screws to bracket (Td4 engine) | ||
| - M8 | 25 Nm | 18 ft·lbs |
| - M10 | 45 Nm | 9.5 ft·lbs |
| Upper and lower generator screws (engine K1.8 with air conditioning) | 45 Nm | 33 ft·lbs |
| Allen screw for fastening the intermediate pulley of the additional belt drive (engine Td4) | 25 Nm | 18 ft·lbs |
| Nut for fastening the battery cable to the generator terminal (Td4 and KV6 engines) | 10 Nm | 7.5 ft·lbs |
| Nut securing the battery cable to the starter electromagnetic relay terminal (engine K1.8) | 8 Nm | 6 ft·lbs |
| Nut securing the battery cable to the starter electromagnetic relay terminal (engine K1.8) | 13 Nm | 9.5 ft·lbs |
| Battery terminal screw | 12 Nm | 9 ft·lbs |
| Screws securing battery and starter cables to engine compartment fuse and relay box terminals | 8 Nm | 6 ft·lbs |
| Nut for fastening thermostatic housing of electronic units | 9 Nm | 7 ft·lbs |
| Screws for fastening the support plate of the passenger compartment fuse box to the car body | 8 Nm | 6 ft·lbs |
| Screws securing the passenger compartment fuse box to the support plate | 8 Nm | 6 ft·lbs |
| Starter mounting screws (Td4 engine) | 45 Nm | 33 ft·lbs |
| Upper and lower bolts and nuts for fastening the starter to the engine (engine K1.8) | 45 Nm | 33 ft·lbs |
| Upper and lower bolts and nuts for fastening the starter to the engine (engine K1.8) | 80 Nm | 59 ft·lbs |
The article was copied from this resource: www.LRman.ru
Comments on this article