Contents: Dismantling ⇩ Installation ⇩
Dismantling
1. Remove the airbag module from the steering wheel.
PASSIVE SAFETY SYSTEMS, REPAIR WORK, Driver's airbag.
2. Release the cruise control wires from the clamps and disconnect the connector.
3. Remove the 2 screws securing the cruise control switch and remove the switch.
Installation
1. Install the cruise control switch and secure it with screws.
The original article is located on the website www.lrman.ru
2. Connect the connector to the switch and secure the wires in the clamps
3. Install the driver's airbag.
PASSIVE SAFETY SYSTEMS, REPAIR WORK, Driver's airbag.
Comments on this article