Sunroof, manual control (Discovery 1)

Removal

1. Close the hatch.

2. Remove the ceiling panel.

3. Loosen the hatch drive mounting screws and remove the drive from the lower frame.

4. Disconnect the drainage channels.

5. Unscrew the 13 frame mounting screws and remove the lower frame.

6. Remove the top frame.

Installation

7. Place the top frame into the roof hatch opening.

8. Position the bottom frame and connect the drainage channels.

9. Hand tighten the frame mounting screws, center the hatch in the opening, and tighten the screws.

10. Reinstall the removed parts.