Hatch drive electric motor (Discovery 1)

Front electric motor

1. Close the hatch. If the sunroof electric motor is faulty, close the sunroof manually by rotating the motor shaft A using a hex key.



2. Disconnect the battery.

3. Remove the sunroof switch panel.

4. Remove the interior light bulb.

5. Remove the ultrasonic unit of the anti-theft system.

6. Remove the mounting panel for the above mentioned elements from the ceiling panel.

7. Disconnect the electric motor connector.

8. Unscrew the 3 mounting screws and remove the electric motor.

9. Installation is carried out in reverse order.

Attention: Before installation, make sure the sunroof is completely closed and check the alignment of the mounting holes of the electric motor and the roof. Do not rotate the electric motor by the shaft - this may result in incorrect operation of the hatch.

Rear electric motor

1. Close the hatch. If the sunroof motor is faulty, close the sunroof manually by turning the motor shaft A using a hex key.

2. Disconnect the battery.

3. Remove the ceiling panel.

4. Disconnect the electric motor connector.



[The publication was copied from a web resource www.LRman.ru]

5. Unscrew the 3 mounting screws and remove the electric motor.

6. Installation is carried out in reverse order.

Attention: Before installation, make sure the sunroof is completely closed and check the alignment of the mounting holes of the electric motor and the roof. Do not rotate the electric motor by the shaft - this may result in incorrect operation of the hatch.