Contents: Removal ⇩ Installation ⇩
The hatch can be driven either manually or by an electric motor. In the latter case, the opening of the hatch is controlled by pressing switches mounted on the roof (ceiling of the cabin).
Hatch components 1 - glass panel, 2 - cap nut and washer, 3 - screw, 4 - upper frame, 5 - lower frame, 6 - screw, 7 - cover plate, 8 - drain gutter.
Removal
1. Move the hatch to the tilted open position.
2. Using a screwdriver with a right-angled blade, unscrew the 4 screws securing the glass panel and remove the glass from the upper frame.
Installation
3. Install the new glass into the upper frame and lightly tighten the mounting screws.
4. Close the hatch and center the glass in the top frame.
(The original article is located on the website: LRMAN.ru)
5. Open the hatch and tighten the fastening screws.
Caution: Make sure that the cap nut washers do not twist when tightening the screws.
Comments on this article