Contents: Removal ⇩ Installation ⇩
Removal
1. Remove the mudguard. Unscrew the 3 screws.

2. Remove the rear side body panel molding.
- Remove the 3 clips at the bottom of the molding.
- Release the 6 rear side panel clips.

3.
NOTE: Do not perform further disassembly if the part is removed only for access.
Release the molding from the clamps.

Installation
1. Install the elements back in place in reverse order.
[The article is based on information from the website www.LRman.ru]
Comments on this article