Item name | Spare part number | Description |
1 | - | Front axle valve block |
2 | - | Pipe between front axle valve block and right front air shock absorber module |
3 | - | Right front air shock absorber module |
4 | - | Left front air shock absorber module |
5 | - | Pipe between reservoir valve block and front axle valve block |
6 | - | Tube between receiver valve block and receiver |
7 | - | Exhaust tube |
8 | - | Right rear air shock absorber module |
9 | - | Pipe between rear valve block and right rear air spring module |
10 | - | Silencer assembly |
11 | - | Air intake filter |
12 | - | Main air intake |
13 | - | Left rear air shock absorber module |
14 | - | Rear axle valve block |
15 | - | Pipe between reservoir valve block and rear axle valve block |
16 | - | Compressor inlet pipe |
17 | - | Compressor outlet pipe |
18 | - | Compressor block |
19 | - | Pipe between compressor block and receiver valve block |
20 | - | Receiver valve block |
21 | - | Receiver |
22 | - | Pipe between front axle valve block and left front air spring module |
The air line system consists of ten individual nylon tubes connecting the system components with Voss type fittings. The tubes have the following diameters:
A tube | Diameter |
High pressure pipes | 6 mm |
Compressor inlet pipe | 8 mm |
Tube between filter and muffler | 8 mm |
Compressor outlet pipe | 10 mm |
Muffler exhaust pipe | 19 mm |
In case of tube damage, there is a device to connect to the system for repair purposes. The tubes are attached to the body and chassis with plastic clips.
Comments on this article