Differential lock motor (Discovery 3)

Removal

1.

CAUTION: Never work on a vehicle supported only by a jack. Always support the vehicle with special stands.

Raise and support the vehicle.

2. Remove the differential lock motor.

• Disconnect the electrical connector.
• Remove 4 bolts.

Installation

1. Clean the contact surfaces of the parts.

2. Apply a continuous bead of sealant to the differential mating surface that contacts the differential lock motor.



3. Install the differential lock motor.

• Tighten the bolts (tightening torque 10 Nm).
• Connect the electrical connector.

4. Lower the car.

5. Calibrate the differential lock motor using a scan tool.