Tightening torque specifications
| Name | Nm | lb-ft |
| Bolt for fastening the oil feed pipe connection to the turbocharger | 30 | 22 |
| Bolt for fastening the oil supply pipe to the cylinder block | 10 | 7 |
| Bolts securing the oil drain pipe connection to the turbocharger | 10 | 7 |
| Bolt securing the oil drain pipe to the cylinder block | 10 | 7 |
| EGR valve to cylinder head mounting bolts | 10 | 7 |
| EGR Cooler Support Bracket Mounting Bolt | 10 | 7 |
| EGR valve pipe to exhaust manifold mounting bolts | 10 | 7 |
| * Nuts securing the turbocharger to the exhaust manifold | 24 | 18 |
| Turbocharger heat shield mounting bolts | 10 | 7 |
| * Exhaust manifold mounting studs | 13 | 10 |
| *+ Exhaust manifold mounting nuts | 24 | 18 |
| Differential support bracket heat shield mounting bolts | 10 | 7 |
| Heat shield bolts | 10 | 7 |
| Heat shield nut | 10 | 7 |
| Oil level indicator dipstick tube mounting bolt | 10 | 7 |
| Turbocharger mounting stud | 13 | 10 |
| Turbocharger mounting bolts | 32 | 24 |
| Turbocharger to gearbox mounting bracket nut | 25 | 18 |
| Turbocharger to gearbox mounting bracket bolts | 48 | 35 |
+ Tighten the nuts in the sequence shown.
* New nuts/studs required
The article is based on information from the website www.lrman.ru
Comments on this article