Contents: Lubricants ⇩ Working volume ⇩ General technical characteristics ⇩ Tightening torque specifications ⇩
Lubricants
| Paragraph | Technical specifications |
| * Recommended lubricants | ATF Shell M13754 |
| + Torque converter neck | Molybdenum disulphide based grease meeting FB180 specifications |
CAUTION: * Use only specified lubricants.
CAUTION: + Do not over-lubricate.
Working volume
| Paragraph | Working volume |
| + Initial "dry" filling | (£) 9.5L |
ATTENTION: + A final check of the oil level/topping up must be performed after installing the block.
General technical characteristics
| Paragraph | Technical specifications |
| Automatic transmission | ZF6HP26 |
| Transmissions | 6 forward gears, 1 reverse gear |
| Gear ratios: | |
| First gear | 4,17:1 |
| Second gear | 2,340:1 |
| Third gear | 1,521:1 |
| Fourth gear | 1,143:1 |
| Fifth gear | 0,867:1 |
| Sixth gear | 0,691:1 |
| Reverse gear | 3,403:1 |
| Hydrotransformer | Sachs W260 2GWK with dual friction surface locking clutch and clutch slip adjustment |
| Gearbox Control Module: | |
| Location | Gearbox housing |
| Type | 1904 |
[The original text can be found at: www.lrman.ru]
Tightening torque specifications
| Description | Nm | lb-ft |
| Gearbox Heat Shield Bolts | 10 | 7 |
| Gearbox Heat Shield Bracket Bolts | 10 | 7 |
| Fuel Line Heat Shield Bracket Bolts | 10 | 7 |
| Selector cable bracket nut | 12 | 9 |
| Transmission Control Module Torx Screws | 8 | 6 |
| Main Control Valve Block Torx Screws | 8 | 6 |
| Transmission Oil Pan Torx Screws | 8 | 6 |
| Right engine mount nut | 90 | 66 |
| Gearbox mount cushion bolts | 60 | 44 |
| Selector shaft nut | 12 | 9 |
| Selector Cable Bracket Bolts | 10 | 7 |
| Bolts for fastening the flexible disk to the torque converter | 45 | 33 |
| Gearbox bolts | 45 | зз |
| Gearbox Breather Tube Clamp Bolt | 25 | 18 |
| Gearbox Pipe Clamp Bolt | 10 | 7 |
Comments on this article