Lubricants
| Position | Specification |
| * Recommended lubricants | Shell M13754. Land Rover Part # TYK500050 |
| + Torque converter neck | Molybdenum disulphide based grease meeting FB180 specifications |
CAUTION: * Do not use any lubricant other than that specified.
CAUTION: + Avoid overfilling the lubricant.
Filling volume
| Position | Filling volume |
| + Initial "dry" filling | 9.5 l (16.7 pints) (10.0 US quarts) |
ATTENTION: + The final check/pumping out/topping up of the lubricant is performed after the unit has been installed on the vehicle.
(Original version of the article on the website lrman.ru)
General specification
| Position | Specification |
| Automatic transmission | ZF6HP26 |
| Number of gears | 6 forward, 1 reverse |
| Gear ratio: | |
| First gear | 4,17:1 |
| Second gear | 2,340:1 |
| Third gear | 1,521:1 |
| Fourth gear | 1,143:1 |
| Fifth gear | 0,867:1 |
| Sixth gear | 0,691:1 |
| Reverse | 3,403:1 |
| Torque converter | Sachs W260 2GWK with dual friction surface locking clutch and adjustable slip |
| Gearbox control computer: | |
| Location | Located in the gearbox |
| Type | 1904 |
Tightening torque specifications
| Name | Nm | lb-ft |
| Transmission Fluid Filler/Level Check Plug | 35 | 26 |
| Transmission drain plug | 9 | 7 |
| Selector lever nut | 12 | 9 |
| Gear Selector Cable Bracket Bolts | 10 | 7 |
| Main Control Valve Housing Torx Head Screws | 8 | 6 |
| Transmission Oil Pan Torx Head Screws | 8 | 6 |
| Right engine mount bolts | 45 | 33 |
| Gearbox Heat Shield Bracket Bolts | 10 | 7 |
| Gearbox Heat Shield Bolts | 10 | 7 |
| Torx Head Bolt for Wiring Harness Bracket | 10 | 7 |
| Torque Converter Bolts | 45 | 33 |
| Gearbox mounting bolts | 45 | 33 |
| Radiator Access Panel Bolts | 10 | 7 |
| Breather tube clamp bolt | 25 | 18 |
| Fuel line clamp bolt | 10 | 7 |
| Fuel Line Heat Shield Bolts | 10 | 7 |
| Gearbox protection bolts | 10 | 7 |
| Gearbox support cushion | 60 | 44 |
Comments on this article