Dismantling
1. Disconnect "negative" battery terminal.
2. Loosen the lower bolt securing the upper timing belt cover.
3. Turn away 5 bolts of fastening of the top cover to a back cover.
4. Remove the upper part of the timing belt cover with seal.
Installation
1. Wipe the lid.
2. Install the cover, making sure the seal is in the correct position.
3. Screw in the cover fixing bolts and tighten them to 5 Nm.
4. Tighten the lower bolt securing the cover to the engine to 5 Nm.
5. Attach "negative" battery terminal.
Comments on this article