Dismantling
1. Disconnect "negative" battery terminal.
2. Remove a noise-insulating casing of the engine.
KV6 ENGINE - MODIFICATION K, Camshafts of the left cylinder head, Noise-insulating casing of the engine.
3. Ratchet on 3/8" release the tensioner and remove the belt from the alternator pulley.
4. Remove the lower engine protection.
EXTERIOR PARTS, REPAIR WORKS, Engine lower shield.
5. Turn away 3 bolts of fastening of the compressor of the central air to an arm, take away the compressor aside and fix it.
6. Remove the compressor heat shield.
Installation
1. Clean the mating surfaces of the compressor and bracket.
2. Install the compressor heat shield.
3. Install the compressor on the bracket and install the heat shield on it. Screw in the bolts and tighten them to 25 Nm.
4. Ratchet on 3/8" remove the tensioner and put the belt on the pulleys of the mounted units.
5. Reinstall the lower motor guard.
EXTERIOR PARTS, REPAIR WORKS, Engine lower shield.
6. Replace the engine soundproof cover.
KV6 ENGINE - MODIFICATION K, Camshafts of the left cylinder head, Noise-insulating casing of the engine.
7. Attach "negative" battery terminal.
Comments on this article