Inspection and verification (Freelander 2)

CAUTION: Diagnostics by substituting an element from another vehicle is NOT permitted. Substituting control units does not guarantee confirmation of the fault and, in addition, may cause additional faults in the vehicle being tested and/or in the vehicle from which the units are removed.

1. Visually inspect for obvious signs of mechanical and electrical damage.

Mechanical elements	Electrical factors
Fuel leaks Damaged fuel lines Damaged fittings Fuel level Fuel contamination/fuel brand/fuel quality Damaged fuel filler cap Damaged fuel tank filler neck	Fuses and fuses Loose or corroded electrical connectors Wiring harnesses Fuel Pump Control Module (FPDM) Central Junction Box (CJB) Fuel pump relay Engine Control Module (ECM)

2. If an obvious cause for the problem you have identified or the problem described by the customer is found, correct it (if possible) before proceeding with further actions.

3. If the cause is not visually obvious, check the symptom of the malfunction and contact table of signs of malfunction or check for DTCs and refer to the Index diagnostic trouble codes (DTC).