Rear door trim panel (Discovery 1)

1. Disconnect the battery.

2. Unscrew the two screws securing the door handle and remove the handle cover.

3. Remove the manual window handle or remove the electric window switch, if installed.

4. Place a clip remover between the trim panel and the door and carefully remove the trim panel mounting clips.

5. Move the panel away from the door, disconnect the window switch connector, and remove the panel.

Note: The door handle and its rod may fall off after removing the panel.

Details can be found on the website [www.lrman.ru]

6. When installing a new panel, move the missing elements from the old one onto it.

7. Installation is carried out in reverse order. Install the inner handle rod of the lock correctly.