Check - Figure 21
Technical conditions
| Temperature | Resistance |
| 0°C | 5700-5900 Ohm |
| 20°C | 2400-2600 Ohm |
| 40°C | 1100-1300 Ohm |
| 60°C | 500-700 Ohm |
| 80°C | 300-400 Ohm |
| 100°C | 150-200 Ohm |
Make sure the ignition is off.
Disconnect the coolant temperature sensor electrical connector.
Relieve residual pressure in the cooling system. Remove the coolant temperature sensor.
Place the sensor in water of known temperature.
The article was copied from the website www.LRman.ru
Measure the resistance between the sensor contacts.
Comments on this article