Description
The LT230T transfer case provides constant torque transmission to the four driving wheels, has two gears and a mechanically locking differential. Gear shifting and differential locking are carried out by a lever located in front of the main gearbox gear shift lever. Some versions of the gearbox have a gear lock when the ignition is off and an additional warning sound signal.
Differential and output shaft
1 - Shift assembly, 2 - Front output shaft housing, 3 - Cross shift shaft assembly, 4 - Shift shaft and lever, 5 - Fork and rod, 6 - Pin, 7 - Lock shaft, 8 - Lock fork, 9 - Spring and lock washers, 10 - Cover, 11 - Nut, washer and felt seal, 12 - Front flange, 13 - Mudguard, 14 - Oil seal, 15 - Bearing, 16 - Spacer, 17 - Snap ring, 18 - Differential cup (front part), 19 - differential cup (rear end), 20 - Retaining Ring, 21 - Front Output Shaft, 22 - Front Shaft Locking Clutch, 23 - Adjusting Washer, 24 - Bearing, 25 - Adjusting Thrust Washer, 26 - Satellite Gears, 27 - Thrust Washer, 28 - Satellite Gear Axles, 29 - Low Range Gear, 30 - Sleeve and Hub, 31 - High Range Gear, 32 - Sleeve, 33 - Bearing, 34 - Nut, 35 - Differential Lock/Downshift Indicator Light Switch, 36 - Lock Retainer Spring and Ball.
Rear output shaft
1 - rear output shaft, 2 - seal, 3 - speedometer drive housing, 4 - speedometer driven gear shaft, 5 - speedometer drive gear, 6 - spacer, 7 - bearing, 8 - retaining ring, 9 - oil seal, 10 - oil deflector, 11 - flange, 12 - sealing washer.
1 - transfer case housing, 2 - lower cover, 3 - intermediate shaft and sealing ring, 4 - oil seal, 5 - retainer and bolt, 6 - intermediate shaft nut, 7 - bearing, 8 - secondary shaft gear, 9 - adjusting washer, 10 - secondary shaft bearing housing, 11 - gasket, 12 - cover, 13 - spring and high-range retainer ball, 14 - intermediate shaft gears, 15 - bearings, 16 - deformable bushing, 17 - retaining rings.
(The original text was published on the website: lrman.ru)
Switching node
1 - cover screw (4 pcs.), 2 - cover, 3 - cover guide plate, 4 - cover plate, 5 - gasket, 6 - cotter pin, 7 - finger, 8 - seat retaining ring, 9 - lever ball, 10 - seat, 11 - cross shaft, 12 - shift lever, 13 - housing, 14 - bushings, 15 - screw, 16 - plug, 17 - shift fork, 18 - sealing rings.
Comments on this article