Dismantling
1. Remove the top decorative panel of a back rack.
INTERIOR TRIM DETAILS, REPAIR WORKS, 5-door upper luggage compartment trim panel.
2. Turn away a Torx bolt of fastening of an intermediate loop of a seat belt.
3. Turn away a Torx bolt of fastening of an inertial coil and remove the coil.
Installation
1. Fit the inertia coil and tighten the Torx bolt to 50 Nm.
2. Pull the belt off the inertia reel, install the intermediate loop and tighten the Torx bolt to 32 Nm.
3. Install the C-pillar top trim panel.
INTERIOR TRIM DETAILS, REPAIR WORKS, 5-door upper luggage compartment trim panel.
Comments on this article