Dismantling
1. Remove the right back seat.
SEATS, REPAIR WORKS, Rear right seat.
2. Turn away 2 screws and remove a cover of an inertia coil of a seat belt.
3. Turn away a nut and remove an inertial coil.
4. Turn away 5 screws and remove both covers of fastenings of a seat belt.
5. Remove the 3 Torx bolts and remove the seat back from the cushion.
6. Release the rear part of the seat cushion upholstery from its attachment to the frame.
7. Release the front and side parts of the pillow upholstery from the attachment to the frame.
8. Remove the cushion along with the upholstery from the frame.
9. Remove the Torx bolt from the center seat belt lower anchor and right seat belt buckle.
10. Remove the center seat belt together with the right seat belt buckle.
Installation
1. Install the center seat belt lower mount and right seat belt buckle on the seat base and tighten the Torx bolt to 32 Nm.
2. Install the seat cushion on the base.
3. Fix the front and sides of the cushion to the frame.
4. Attach the back of the seat cushion to the frame.
5. Install the seatback and tighten the Torx bolts.
6. Install the seat belt anchor covers and tighten their fastening screws.
7. Install the inertial coil on the seat back and tighten the nuts of its fastening with a torque of 32 Nm.
8. Install the inertia coil cover and tighten the screws securing it.
9. Reinstall the rear seat.
SEATS, REPAIR WORKS, Rear right seat.
Comments on this article